Skip to Content

How to move punches up a line or down a line when punch is on the wrong day and preventing total to be calculated



How to move punches up a line or down a line when punch is on the wrong day and preventing total to be calculated

Fix:

  1. Locate the punch to be moved, since it’s on the wrong day/line
  2. Highlight the punch
  3. Right click the punch
  4. To move the punch up, select Previous Shift
  5. To move the punch down, select Shift Override
  6. Then press the Save button

Note: A punch cannot have both Previous Shift and Shift Override option checked at the same time - only one or the other. Only applies to Time Guardian Plus, Pro, and Time Guardian version 5 or higher.

If you are interested in this feature but you have Time Attendant or TG version 4 or lower, please contact dc@amano.com or 800 367 6649 to purchase one of the new Time Guardian series.

  1. When you have an OUT punch that is pretending to be a new line of IN punch, simply right click on the OUT punch that is pretending as IN then select PREVIOUS SHIFT, press the purple save icon.Done.

  2. EVERY TIME THAT I ENTER A MANUAL PUNCH GIVE ME AN EXTRA SPACE IN YELLOW ============================================================================== REPLY: Thank you for you comment. Please call 800-253-9836 option #3 for assistance.

Get notified when new articles are added to the knowledge base.

Powered by PHPKB (Knowledge Base Software)